Your furnace is a complicated appliance with several components and a ventilation system. Dirt, debris, and a lack of ventilation are common causes for furnace problems but are easily avoided with the right cleaning and care. Some issues are trickier to detect without professional help, but all furnace issues should be repaired as soon as possible. To ensure your furnace works as it should make sure to have the following repairs done by Will’s All Pro:
Change the Air Filter
One of the most common furnace problems is a dirty filter. How often you should change the air filter will depend on the size of your home, how much you use the furnace, and if you have pets. Your furnace needs proper ventilation in order to function properly, and a dirty, clogged air filter can cause it to overwork itself to heat your home. Changing the air filter at least once a year can help increase your furnace’s lifespan and efficiency.
Fix the Pilot Light
A faulty pilot light not only makes it difficult for your furnace to heat your home, but it can also cause a fire hazard. If you suspect your furnace’s pilot light is damaged, call an HVAC technician immediately. Gas-fueled furnaces, for example, should always have a blue pilot light, meaning that the flame is receiving enough oxygen. A yellow light indicates that the amount of oxygen used to combust fuel is restricted. A common cause for a faulty pilot light is a dirty air intake valve.
Replace the Thermostat
Sometimes the issue has nothing to do with your furnace at all. A thermostat that’s either faulty or installed in the wrong location could cause your furnace to work more than necessary. If your furnace seems to be cycling more than usual or you feel a fluctuation in temperature, the issue may be the thermostat. If you need to replace your thermostat, now may be a good time to upgrade it to a smart thermostat, which can allow you to monitor your energy usage and even schedule different heating settings.
Check the Switches and Breakers
As odd as it sounds, sometimes all your furnace needs is to be turned on. There should be a standard wall switch on or around your furnace somewhere. It’s also a good idea to check the fuse for it on the circuit breaker. The front panel covering the furnace’s blower motor should also be securely fastened, as there is a push-in switch underneath that needs to be fully depressed in order for it to operate.
Clear the Air Ducts
Your furnace works by circulating heat throughout your home, but over time the air ducts can collect a lot of dust and debris. Dirty air ducts not only wear down your furnace but circulate dirty air throughout your home. If you suspect your air ducts are dirty, it’s best to have a professional clean them to avoid damages. A professional air duct cleaning can also alert you of any air leaks that need to be sealed.
Clean out Vents
Besides keeping your air ducts clear of debris, you’ll also want to check your furnace vents. Any vents that lead to the outside of your home can be prone to clogs, usually from plant debris, pests, or ice. Installing a screen mesh can help keep most debris from clogging the vent, but it should be cleaned frequently. If your home has a heat pump, make sure to keep all grass clippings and leaves away from the fins of the outdoor compressor unit.
How Will’s All Pro Can Help You
Whether you have an electric or gas heater, it should be professionally checked before winter. Just because your heater worked perfectly last year, it doesn’t mean that it’s ready to go this season. It could have worn parts, a gas leak, dirty heating elements or a malfunctioning thermostat, and the time to find these problems is not when the overnight temperatures drop below 40 degrees. In addition to your comfort and safety, performing heater maintenance with Fall checkups can help your budget too.
Don’t wait till your heating system malfunctions completely and leaves you in the cold. Call Will’s All Pro today to get your Austin home or business ready for the cooler weather!